Insulation removal in Clarksville TN - a clean attic ready for new insulation
Wet, moldy or chewed-up insulation in your attic? We pull it out, haul it off and leave the space clean for what goes in next.
Request an estimate
Does my old attic insulation need to come out?
Insulation removal in Clarksville means pulling out attic insulation that water, mold, fire or pests have ruined and hauling it away, so the new insulation goes onto clean, dry wood and not over the old damage.
Most calls start with a stain on the ceiling, a smell that won't quit, or something scratching overhead at night that isn't paying rent. When the insulation up there is matted from a leak or full of droppings, putting new attic insulation on top just buries the problem, so it comes out first. The price moves with the size of the attic, how deep the old layer is, what got into it and how easy it is to reach, and the schedule turns mostly on size and how cramped the space is. I'll give you a figure for your own attic once I've been up there.
How our insulation removal works
I start by going up there myself to see what's in the attic, how deep it is and what ruined it, because a roof leak, a family of mice and an old chimney fire each leave a different mess. If anything up there looks like vermiculite, we stop right there, leave it alone and point you to testing and an abatement company that isn't us. Otherwise our crew covers a path through your house, pulls the ruined insulation out, bags it and hauls it off. Then we clean up what's left and look hard at the wood underneath, since wet framing or a hole the critters use has to be settled before anything new goes in, or you're paying to do this twice.
Leaks and pests don't always stop at the attic. If the same water or critters got under the floor, we clear that out too and can follow with crawl space insulation, and when a fire or a leak reached inside the walls we can put back wall insulation once the cavities are dry and open.
Insulation removal in Clarksville and the cities around it
The City of Clarksville says that, under Tennessee law, any project worth $25,000 or more has to be done by a contractor licensed by the state, and the city also requires contractors working inside its limits to register with it. Removal plus a full reinsulation on a large house can add up faster than people expect, so ask anyone you're comparing about both the state license and the city registration, and check with the city if you want to confirm. We'll answer both questions at the estimate.
We're based in Clarksville and work across the cities around it, on both sides of the Tennessee and Kentucky line. A lot of what we pull out comes from older houses where a few layers got stacked over the years and a leak or a squirrel got into the bottom one, and we see the same thing on jobs in Oak Grove and Pleasant View.
Old insulation on its way out
Get your damaged attic insulation looked at
We reply to every message within one business day to set a time, and I usually come out myself for a free on-site estimate. You'll hear what I found and what it'll take, with no pressure and no obligation to go ahead.
(931) 272-0044Insulation removal questions from Clarksville
How much does insulation removal cost in Clarksville, TN?
Removing old insulation from an attic across the US usually costs about $600 to $3,600 per job, and that's a national range for the market, not our price. Where your attic lands depends on its size, how much is up there and what ruined it. Your own figure comes after I've seen the attic.
What does vermiculite insulation look like and what should I do if I have it?
Vermiculite is a pebble-like, pour-in insulation, usually gray-brown or silver-gold, and the EPA says to treat it as if it contains asbestos and leave it undisturbed. If it has to come out, the EPA says a trained, accredited asbestos abatement contractor should do it, separate from whoever looked at it, so the firm judging the problem isn't the one paid to fix it. The EPA also says that crew seals the work area off with plastic sheeting and tape and turns off the heating and air, so expect part of the house closed and no heat or cooling while they work.
How long does attic insulation removal take?
Attic insulation removal takes anywhere from 4 hours to 2 days or more, depending on how big the attic is and how complicated the job gets. If your attic is large, low or chopped up with framing, plan for the longer end.
Is disposal included in the price of insulation removal?
Disposal is usually part of the total price, but that can change when the old insulation has asbestos, mold or a pest problem, so ask how disposal is priced in your quote if any of those are in your attic. Montgomery County's waste services page lists asbestos and construction and demolition debris among the wastes it accepts, and you're welcome to ask us where yours goes once it leaves.
Do I need a permit to remove insulation in Clarksville?
We settle that before work starts by finding out whether your address falls under the city or the county and what that office wants. When a permit is needed for our part of the job we take care of it, and if part of the work belongs to another trade, we'll tell you so.
How do I get my attic ready for insulation removal?
Clear out the boxes, old junk and debris before we come, because the less there is to move, the fewer labor hours go into getting the space ready. If something's too heavy or you'd rather not climb up there, tell us at the estimate so we can plan around it.
Call us about your Clarksville attic
If you can tell us roughly how big the attic is and whether water, mold, smoke or critters got into it, the first call to (931) 272-0044 or the form goes a lot quicker.