Spray foam insulation in Clarksville TN - a house sealed and insulated in one step
Hot upstairs, a drafty room over the garage or a power bill that keeps climbing? Foam seals the leaks and insulates in the same pass.
Request an estimate
Is spray foam worth it for my house in Clarksville?
Spray foam insulation in Clarksville, TN is sprayed in place, usually under the roof deck or along the rim joists, and it seals air leaks and insulates in the same step, so it does its best work in hard-to-reach spots and in attics where the ductwork lives.
Most of the calls I get start with a hot upstairs, a cold room over the garage or a power bill that's out of line for the size of the house. The price turns on how many square feet we cover, which foam goes on and how thick, and whether old insulation that's soaked or full of droppings has to come out first through insulation removal. The schedule turns on the same things plus the time your family spends out of the house, and your own figures come from the estimate I do on site.
How we put in spray foam insulation
I start by looking at what's already up there, because foam sprayed over a wet or dirty mess just seals the problem in. Then I check whether the ducts and the furnace sit in the attic, since that decides whether we spray the underside of the roof deck, the boards your shingles sit on, or keep the foam on the attic floor. Before anything new goes in, we make sure the furnace and water heater can still vent right and the wood is dry, because a tighter house doesn't help anyone if the exhaust has nowhere to go. We set your time out of the house at the estimate, not the morning of, so nobody's chasing the dog around at 7 AM. On install day our crew covers what shouldn't get foam, sprays it, trims it back and cleans up, and I'm involved from the first look to the last walk-through.
Foam costs more than loose fill, and it earns that when it's sealing and insulating somewhere hard to reach. If your ducts aren't in the attic, I'll usually tell you to close the gaps around the lights, pipes and hatch and top up with blown-in insulation, loose fill blown in through a hose, because that gets you there for less. Our attic insulation work covers that whole attic floor, foam or not.
Spray foam insulation permits and houses in Clarksville
The City of Clarksville issues residential building permits, but its list names construction, additions and renovations, not spray foam, so that list doesn't settle whether your job needs one. Montgomery County issues building permits too, and its list covers single family homes, additions and renovations. Before work starts we find out whether your address falls under the city or the county and what that office wants, and when a permit is needed for our part of the job, we take care of it. If part of the work belongs to another trade, like moving a furnace vent, we'll tell you so.
Around Clarksville we crawl a lot of older attics with the ductwork running right over the bedrooms, plus rooms over garages and metal buildings for business owners. We see the same kinds of houses on jobs in Oak Grove and Pleasant View, and we work across the cities on both sides of the Tennessee and Kentucky line.
Spray foam work up close
Get a spray foam estimate for your house
We reply to every message within one business day, and I'll set a time to come look at the job myself. The estimate is free, done on site, and comes with no obligation.
(931) 272-0044Spray foam questions from Clarksville homeowners
How much does spray foam insulation cost in Clarksville, TN?
Spray foam insulation in Clarksville usually costs about $1 to $5 per square foot, which is a planning figure for the area, not our price. Where you land in that range depends on the foam type, how thick it goes on and how much prep the space needs, and your actual number comes from our estimate.
Should I choose open-cell or closed-cell spray foam?
Choose closed-cell foam, the dense kind that blocks moisture, when you want the foam to handle moisture vapor as well as heat, because open-cell foam is vapor open and can't control vapor. Open-cell still seals and insulates, so it can make sense where something else takes care of vapor, and I'll tell you which fits each part of your house.
How long do we have to stay out of the house after spray foam is installed?
Federal safety guidance says residents should leave for at least 24 hours when spray foam is installed, so line up a place for the whole family, pets included, before the install date. An older EPA guide says re-entry time, when you can come back, waits until the foam has cured and the house has been aired out and cleaned, and we'll tell you when each of those is done. Treat it as a planning step, since the chemicals can cause asthma, lung damage, other breathing problems and skin and eye irritation when people are around them.
Who can do spray foam insulation work in Clarksville?
The City of Clarksville says any project valued at $25,000 or more has to be done by a contractor licensed by the State of Tennessee. If your project is that size, ask to see the contractor's state license before anyone starts.
What is the best way to insulate an attic with ductwork in it?
Spraying foam under the roof deck has real advantages when the furnace and ducts sit in the attic, because they end up inside the insulated part of the house and lose less heat. That makes the attic unvented, so it needs a way to get rid of moisture, and we work out with you how the sealed attic stays conditioned before we spray.
Does spray foam need to be covered after it's installed?
Sometimes, because a thermal or ignition barrier, such as a coating or drywall, goes over the foam when the product or the code calls for it. Not every foam needs one, so it's worth asking about the specific product, and we check that before we price the job.
Book your spray foam estimate in Clarksville
Call (931) 272-0044 or send the form with your rough square footage, and since we answer 7 AM to 11 PM, seven days a week, you don't have to wait for a weekday.